SNMP

The Administration > SNMP page can be used to control the device's SNMP (v2c/v3) settings.

The switch control at the top of the page can be used to enable or disable the SNMP agent running inside the device. The interface also allows the configuration of SNMP community entries (v2c) and users (v3). These can be used to receive GET/WALK requests or to configure trapsinks. It is possible to download the necessary Profitap-specific MIB definitions using the Download MIBs button. The device can register SNMP traps sink servers. Once configured, these will receive SNMP traps for the following events:

PSU hardware state change;
FAN hardware state change;
Device temperature reaching warning levels;
Device temperature reaching critical levels;
Available disk space low;
Available memory low;
Ports changing link state;
Ports detecting packets incoming with CRC errors;
Ports detecting buffer drops.