Device reset

To reset the password and network parameters, use the following procedure: while the device is POWERED, press and hold the START/STOP/RESET button for 20 seconds. The procedure is complete when the LEDs turn green.

To reset the IOTA to factory settings, use the following procedure: while the device is UNPOWERED, press and hold the START/STOP/RESET button, connect the power cable, and keep holding the button until the LEDs turn orange (~20 seconds). Release the button, and wait until the LEDs turn green (~5 minutes).

Note: Resetting the IOTA to factory settings will remove all data stored on the device.