Swapping SSD

Note: This article is deprecated. For the up-to-date versions of this article, see kb.profitap.com/iota/

Applies to:  IOTA 1G+  IOTA 10G+

The procedure for swapping the SSD is as follows:

1. Power off the device
2. Unscrew the front panel drawer
3. Remove the drawer
4. Remove the SSD
5. Install the new SSD in the drawer
6. Place the drawer in the device
7. Tighten the drawer screw
8. Power on the device

Note that it will take several minutes for the system to install on the new SSD (~4–5 minutes depending on the model of SSD).

The recommended SSD types are Samsung EVO 1 TB and 2 TB (NVMe). They can be ordered directly from Profitap (sales@profitap.com).