IOTA 1G interfaces and LED behavior

Note: This article is deprecated. For the up-to-date versions of this article, see kb.profitap.com/iota/





1, 2 RJ45 Ethernet port A and B
3 START/STOP/RESET button
4, 5, 6, 7 Network status and activity LEDs
8 Status LED
9 Capture LED
10 12 VDC power input (12V model)
10 24-48 VDC power input (24V model)
11 RJ45 Management port
12 2 x USB 3.0 port type A




LED state Meaning
4 and/or 7 steady green The port is linked.
4 and/or 7 blinking green The port is linked and has RX/TX activity (traffic is passing through).
5 steady green
6 off
Capture interface operating at 10 Mbps speed.
5 blinking green
6 off
Capture interface is initializing.
5 off
6 steady green
Capture interface operating at 100 Mbps speed.
5 off
6 blinking green
Capture interface firmware is corrupted.
5+6 steady green Capture interface operating at 1 Gbps speed.
5+6 blinking green The port is linked and has RX/TX activity (traffic is passing through).
5+6 alternating blinking Capture interface cannot find a common speed between the connected devices.
8 blinking orange
9 off
Booting
8 green
9 green
Running
8 green
9 blinking green
Capturing
8 blinking orange and green
9 blinking orange and green
Updating
8 blinking red
9 blinking red
Hardware failure
8 blinking orange
9 blinking orange
Factory reset
8 blinking green
9 off
Shutting down
8 off
9 off
Shutdown completed
  • Last modified: January 22, 2024