ProfiShark 1G interfaces and LED behavior
Interfaces
| 1, 2 | RJ45 Ethernet port A and B |
|---|---|
| 3, 6 | Link/Activity LEDs |
| 4, 5 | Speed LEDs |
| 7 | Power LED |
| 8 | Optional DC power input (5V, 1A, center positive) |
| 9 | USB 3.0 port type B |
LED behavior
| LED state | Meaning |
|---|---|
| 3 and/or 6 steady green | The port is linked. |
| 3 and/or 6 blinking green | The port is linked and has RX/TX activity (traffic is passing through). |
| 4 steady green | ProfiShark operating at 10 Mbps speed. |
| 5 steady green | ProfiShark operating at 100 Mbps speed. |
| 4+5 steady green | ProfiShark operating at 1 Gbps speed. |
| 4+5 blinking green | ProfiShark is not connected or is trying to connect. |
| 4+5 alternating blinking | ProfiShark cannot find a common speed between the connected devices. |
| 7 off | No USB cable nor power cable are connected. |
| 7 on | USB cable and/or power cable are connected. |
| 7 blinking | Constant synchronization between system time and hardware timestamp (blink ON every even second, blink OFF every odd second). |