ProfiShark 10G interfaces and LED behavior
Interfaces
| 1, 2 | SFP+ port A and B |
|---|---|
| 3, 4, 5, 6 | SFP and network status and activity LEDs |
| 7 | Power LED |
| 8 | Optional DC power input (5V, 1A, center positive) |
| 9 | USB 3.0 port type B |
LED behavior
| LED state | Meaning |
|---|---|
| 3+4 and/or 5+6 orange | No SFP module present or detected. |
| 3+4 and/or 5+6 green slow blink | No link. |
| 3+4 and/or 5+6 red | Connect additional power. |
| 4 and/or 6 green | SPAN mode, link up. |
| 4 and/or 6 green fast blink | SPAN mode, traffic activity. |
| 3+4+5+6 green | In-Line mode, link up. |
| 3+4+5+6 green fast blink | In-Line mode, traffic activity. |
| 7 off | No USB cable nor power cable are connected. |
| 7 on | USB cable and/or power cable are connected. |
| 7 blinking | Constant synchronization between system time and hardware timestamp (blink ON every even second, blink OFF every odd second). |