Swapping SSD
Applies to: IOTA 1G+ IOTA 10G+
The procedure for swapping the SSD is as follows:
- Power off the device
- Unscrew the front panel drawer
- Remove the drawer
- Remove the SSD
- Install the new SSD in the drawer
- Place the drawer in the device
- Tighten the drawer screw
- Power on the device
Note that it will take several minutes for the system to install on the new SSD (~4–5 minutes depending on the model of SSD).
The recommended SSD types are Samsung EVO 1 TB and 2 TB (NVMe). They can be ordered directly from Profitap (sales@profitap.com).